Anti-static bars (Electric shockproof, non shockproof)
SIMCO anti-static bars generate an electrical field which causes the air molecules in the vicinity of the bar to break down into positive and negative ions. Because opposite charges attract, any charged material passing near the bar will attract ions until the charge on the material is neutralized. The materials will no longer be attracted to each other or to the machine parts. Attraction of dust, explosion or fire hazards and electrical shocks to personnel caused by static discharge are avoided. SIMCO offers a very wide range of antistatic bars in shockproof and non-shockproof versions. The anti-static bars consist of a series of ionizing emitter points powered by a remote highvoltage power unit.
Type MEB
Each individual emitter point of this rectangular anti-static bar is coupled capacitively to the high voltage. You will therefore not get an electrical shock when the point is accidentally touched. Another advantage is that the bar continues to function properly when a number of points are short-circuited, for instance due to heavy fouling.
- Details -Type MEJ
The properties of this SIMCO anti-static bar are the same as those of type MEB, except that the former type is round. The outside diameter is 18 mm.
- Details -Type SS
The emitter points of this SIMCO Super Service anti-static bar are directly coupled to the high voltage. This bar is usually installed in such a manner that the emitter points cannot be touched. The bars are easily cleaned with a non-metal brush and are therefore excellently suited for being installed in places which may be subject to heavy fouling...
- Details -Type MaxION
Each individual emitter point of the MaxION anti-static bar is coupled capacitively to the high voltage. You will therefore not get an electrical shock when the point is accidentally touched.
The MaxION has a 50% higher output current than existing shockproof anti-static bars. The higher output current enables the bar to neutralize static electricity...
- Details -- [ Site map ]
Vortex Italia
Via Dante, 83 - 20811 Cesano Maderno (MB)
Tel: +39 0362 54 56 45
Info tecniche: +39 335 61 68 653
Fax: +39 0362 60 99 62
P. Iva: 02651900967
E-mail: info@vortexitalia.com