Ionizing air nozzles
Ionizing air nozzles produce a high-velocity ionized air flow which simultaneously cleans and neutralizes static charges on parts and materials. The nozzles operate on compressed air and provide a pin-point ionized air source for being used in critical cleaning and/or static neutralizing. Nozzles can be fitted and installed in many configurations to meet specific requirements. SIMCO power units supply the high voltage necessary for operation. If required, all nozzles can be fitted with a stop valve. The HE and H types can be fitted on a standard air header.
Type HE
The high voltage at both emitter points is current limited, so you can touch the nozzle without getting an electrical shock. Being installed outside the air flow, the high-voltage points are hardly subject to fouling, if at all. The nozzle blow-off force is high at a relatively low air consumption. They operate on both ordinary compressed air and nitrogen...
- Details -Type H
Being coupled directly to the high voltage, the highvoltage point is not shockproof. The high-voltage point is so located in the nozzle head that it cannot be touched. The nozzles operate on both ordinary compressed air and nitrogen. Suitable power unit: A2A4 S.
- Details -Type BW
This nozzle has been designed especially for neutralizing and cleaning (small) bottles on the inside, etc. Ionization takes place at the end of the tube from which the air is blown. The high-voltage point is not shockproof. The tubes are available in two diameters. You can specify the required length when ordering. Suitable power unit: A2A3 S.
- Details -- [ Site map ]
Vortex Italia
Via Dante, 83 - 20811 Cesano Maderno (MB)
Tel: +39 0362 54 56 45
Info tecniche: +39 335 61 68 653
Fax: +39 0362 60 99 62
P. Iva: 02651900967
E-mail: info@vortexitalia.com