Ionizing airblowers
Plastics attract dust due to static electricity. The dust particles stick firmly to the surface, which makes it difficult to remove them. Due to their configuration, numerous plastic products have to be neutralized from a distance. For this purpose, SIMCO has developed Aerostat ionizing air blowers. The emitter points of the anti-static bar ionize the air which is blown towards the electrostatically charged object. The part is then neutralized by the ionized flow. The distance from the blower to the product or material to be neutralized may be 1.5 m at most. The built-in SIMCO shockproof anti-static bars are energized by a SIMCO power unit which supplies the required voltage for ionization.
Type AS-10
The AS-10 ionizing air blower consists of a motor and a fan. The ambient air is drawn on one side and blown off along three anti-static bars. The air flow that is drawn in is adjustable. The effective ionizing width is 25 cm. The air inlet may be fitted with a special filter.
- Details -Type AS-20
The AS-20 ionizing air blower consists of a motor and two fans. The ambient air is drawn on two sides and blown off along three anti-static bars. The air flow that is drawn in is adjustable on either side. The effective ionizing width is 50 cm. The air inlets may be fitted with a special filter. This ionizing air blower is also ideal for remote neutralizing...
- Details -Type HP-N-Ex
The HP-N-Ex ionizing air blower consists of a motor and a fan. The ambient air is drawn on one side and blown off along two anti-static bars. The effective ionizing width is 50 cm. The air inlet may be fitted with a special filter. This ionizing air blower has been designed especially for explosion-hazardous areas. The power unit is integrated in the...
- Details -- [ Site map ]
Vortex Italia
Via Dante, 83 - 20811 Cesano Maderno (MB)
Tel: +39 0362 54 56 45
Info tecniche: +39 335 61 68 653
Fax: +39 0362 60 99 62
P. Iva: 02651900967
E-mail: info@vortexitalia.com